SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Forklift Part
Used Parts for Forklift - Without doubt, lift truck parts will eventually wear out and need replacing. The alternative of purchasing brand new parts could become expensive so another idea is to acquire used components. This could save a lot of cash in the end. It is a good idea to obtain used lift truck components that have been reproduced. These parts would ensure that you are getting components which would work for a long time and be productive.
Broken or worn parts that are reproduced are a cheaper solution compared to rebuilding. With rebuilding components, only the components that are broken or worn out get replaced, which means that other wearable components could break down soon after acquisition.
Remanufacturing however provides the best assurance for used components. Remanufactured parts are taken apart and cleaned and then all wearable pieces are changed. All wearable components are replaced regardless of age or wear which is one more reason why remanufactured components on the whole function so much better. Whatever part within the part is brand new and this offers much longer life to the used part. Depending on the forklift components that are being redone, the cleaning process and the complete remanufacturing process will vary.
The engines are cleaned after a complete disassembly. Several engine components such as rings, pistons, spark plugs, valves, valve springs, and filters can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to guarantee that there are no oil pressure problems, no leaks, noises or any vacuum.
Transmissions are pressure washed, disassembled and oven cleaned. A thorough inspection is performed to be able to check for any cracks. Seals, bearings and bushings are all replaced. Usually, the replacement components used on transmission components meet OEM specifications.
A few components such as the water pump, torque converters, the alternator, steer axles and the starter could obtain longer serviceability after being remanufactured and having all wearable parts replaced. The electronic control in the electric forklift is maintained by the control card. This particular card can also be remanufactured with replacing all aged and worn out components. Not like other forklift parts the control card could only have the worn and aged components replaced.
Remanufactured parts are comprehensively inspected upon reassembly to guarantee they are in top condition prior to being sold. It is important when acquiring reproduced parts to make certain they have undergone the proper testing and inspection procedures. On certain larger components like for instance transmissions, steer axles and engines, OEM specification replacement parts must be used.
The forklift dealer could guarantee that the components they have remanufactured meet the OEM specifications. This will also ensure the parts meet industry standards. Many details go into remanufacturing used components. This attention to detail provides more serviceability out of reproduced components compared to the parts that were simply rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LOCAL: 602-910-6603
2942 N. 24th St Suite 114-798
Phoenix, Arizona
forkliftpartsphoenix.com
Email Us
About Us